Home
Data Sheet

Data Sheet

Introduction

Edge 2 is a high-performance, rich-interface ARM64 single-board computer designed for IoT networking and computing applications. It may be used in networking, computing, controlling, and home entertainment to achieve more with the support of multitasking software. The single-board computer incorporates a MIXTILE System-on-Module Core 3568, a WLAN+BT wireless module, and several expansion interfaces.

The Edge 2 Kit expands on the Edge 2 by including one configurable enclosure and two external Wi-Fi antennas.

Main Features

Quad-core Cortex-A55 SoC Processor RK3568 up to 2.0GHz
2/4GBytes LPDDR4 SDRAM Memory
16/32GBytes eMMC Flash Memory
0.8 Tops NPU
Wi-Fi 6 802.11ax
Dual-Mode Bluetooth 5.0
Support 4G/5G/LoRa/Zigbee module
1x Gigabit Ethernet Port
1x MicroSD 3.0 Flash Expansion Socket
3x USB 2.0/3.0 ports up to 5Gbps
1x M.2 Socket: PCIe 3.0, USB 3.0, SIM Socket
1x Mini-PCIe Socket: USB2.0, SIM Socket
1 x U.2 Socket: SATA/PCIe, SATA, RGMII/SPI/I2S, USB2.0
1x HDMI2.0, 1x eDP, 2x MIPI-DSI, and 1x MIPI-CSI
- 4KP60 H.265/H.264/VP9 video decoder
- 1080P100 H.264/H.265 video encoder
1x RS485, 1x CAN, 1x I2C, and 2x UART
3x PDM, 1x SPDIF, 1x Speaker, 1x IR, and 4x ADC
Real Time Clock with Battery Backup
2x power supply ports:
- Type-C PD3.0 Power input (Max 3A @ 20V)
- 12V DC/SATA Power input (Max 3A)
Android 11 Board Support Package
0 to +80°C Operating Temperature

Connectors and Pinouts

1. Block Diagram

The Block diagram for the Edge 2 single-board computer is shown below with descriptions for each function of connectors and pinouts.

2. Connectors & Pinouts Description

The following section lists the interfaces connector pin assignments, pin types with corresponding signal descriptions. The interface connectors on Edge 2 are listed in the table below.

Debug

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	UART2_RXD	IO	Input	UART2 serial data input for debug
2	UART2_TXD	IO	Output	UART2 serial data output for debug
3	GND	GND	–	Ground

UART

UART 3

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	3.3V	PWR	Output	3.3V @ 100mA Max
2	UART3_RX	IO	Input	UART3 serial data input
3	UART3_TX	IO	Output	UART3 serial data output
4	GND	GND	–	Ground

UART 5

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	3.3V	PWR	Output	3.3V @ 100mA Max
2	UART5_RX	IO	Input	UART5 serial data input
3	UART5_TX	IO	Output	UART5 serial data output
4	GND	GND	–	Ground

CAN-IO

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	5V	PWR	Output	5V @ 200mA Max
2	CAN1_RX	IO	Input	CAN receive data, connect to CAN transceiver
3	CAN1_TX	IO	Output	CAN transmit data, connect to CAN transceiver
4	GND	GND	–	Ground

I2C

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	3.3V	PWR	Output	3.3V @ 100mA Max
2	I2C3_SCL	IO	Output	I2C clock signal
3	I2C3_SDA	IO	I/O	I2C data signal
4	GND	GND	–	Ground

5V Output

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	5V	PWR	Output	5V @ 2A Max in total
2	5V	PWR	Output	5V @ 2A Max in total
3	GND	GND	–	Ground
4	GND	GND	–	Ground

Power button connector

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	PWRON_CON	IO	Input	Active-low, same as PWR button
2	GND	GND	–	Ground

Reset button connector

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	RESET_KEY	IO	Input	Active-low reset signal, same as RESET button
2	GND	GND	–	Ground

SPDIF

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	SPDIF_TX	IO	Output	SPDIF output signal
2	3.3V	PWR	Output	3.3V @ 100mA Max
3	GND	GND	–	Ground

RS485

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	GND	GND	–	Ground
2	485B	DS	I/O	RS485 differential signal Negative
3	485A	DS	I/O	RS485 differential signal Positive

ADC

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	3.3V	PWR	Output	3.3V @ 100mA Max
2	SARADC_VIN4	ANA	Input	ADC analog signal
3	SARADC_VIN5	ANA	Input	ADC analog signal
4	SARADC_VIN6	ANA	Input	ADC analog signal
5	SARADC_VIN7	ANA	Input	ADC analog signal
6	GND	GND	–	Ground

Speaker

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	SPK+	ANA	Output	speaker driver output Positive
2	SPK-	ANA	Output	speaker driver output Negative

DMIC

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	3.3V	PWR	Output	3.3V @ 500mA Max in total
2	3.3V	PWR	Output	3.3V @ 500mA Max in total
3	GND	GND	–	Ground
4	GND	GND	–	Ground
5	PDM_SDI1	IO	Input	PDM data signal
6	PDM_SDI2	IO	Input	PDM data signal
7	PDM_SDI3	IO	Input	PDM data signal
8	GND	GND	–	Ground
9	PDM_CLK1	IO	Output	PDM clock signal
10	GND	GND	–	Ground

MIPI-DSI0

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	GND	GND	–	Ground
2	MIPI_DSI_TX0_D0N	LVDS	Output	MIPI-DSI0 data signal Negative
3	MIPI_DSI_TX0_D0P	LVDS	Output	MIPI-DSI0 data signal Positive
4	GND	GND	–	Ground
5	MIPI_DSI_TX0_D1N	LVDS	Output	MIPI-DSI0 data signal Negative
6	MIPI_DSI_TX0_D1P	LVDS	Output	MIPI-DSI0 data signal Positive
7	GND	GND	–	Ground
8	MIPI_DSI_TX0_CLKN	LVDS	Output	MIPI-DSI0 clock signal Negative
9	MIPI_DSI_TX0_CLKP	LVDS	Output	MIPI-DSI0 clock signal Positive
10	GND	GND	–	Ground
11	MIPI_DSI_TX0_D2N	LVDS	Output	MIPI-DSI0 data signal Negative
12	MIPI_DSI_TX0_D2P	LVDS	Output	MIPI-DSI0 data signal Positive
13	GND	GND	–	Ground
14	MIPI_DSI_TX0_D3N	LVDS	Output	MIPI-DSI0 data signal Negative
15	MIPI_DSI_TX0_D3P	LVDS	Output	MIPI-DSI0 data signal Positive
16	GND	GND	–	Ground
17	LCD0_BL_PWM4	IO	Output	PWM Output for backlight adjust
18	NC	–	–	Not connected pin
19	3.3V	PWR	Output	3.3V @ 200mA Max
20	LCD0_RST_L_GPIO1_D1	IO	Output	GPIO output for lcd reset
21	SARADC_VIN2_LCD_ID	ANA	Input	Analog signal Input
22	LCD0_PWREN_H_GPIO0_C7	IO	Output	GPIO output for lcd power on
23	I2C1_SCL_TP	IO	Output	I2C clock signal for touch panel
24	I2C1_SDA_TP	IO	I/O	I2C data signal for touch panel
25	TP_INT_L_GPIO0_B5	IO	Input	GPIO for touch panel interrupt
26	TP_RST_L_GPIO0_B6	IO	Output	GPIO for touch panel reset
27	GND	GND	–	Ground
28	5V	PWR	Output	5V @ 500mA Max in total
29	5V	PWR	Output	5V @ 500mA Max in total
30	5V	PWR	Output	5V @ 500mA Max in total

MIPI-DSI1

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	GND	GND	–	Ground
2	MIPI_DSI_TX1_D0N	LVDS	Output	MIPI-DSI1 data signal Negative
3	MIPI_DSI_TX1_D0P	LVDS	Output	MIPI-DSI1 data signal Positive
4	GND	GND	–	Ground
5	MIPI_DSI_TX1_D1N	LVDS	Output	MIPI-DSI1 data signal Negative
6	MIPI_DSI_TX1_D1P	LVDS	Output	MIPI-DSI1 data signal Positive
7	GND	GND	–	Ground
8	MIPI_DSI_TX1_CLKN	LVDS	Output	MIPI-DSI1 clock signal Negative
9	MIPI_DSI_TX1_CLKP	LVDS	Output	MIPI-DSI1 clock signal Positive
10	GND	GND	–	Ground
11	MIPI_DSI_TX1_D2N	LVDS	Output	MIPI-DSI1 data signal Negative
12	MIPI_DSI_TX1_D2P	LVDS	Output	MIPI-DSI1 data signal Positive
13	GND	GND	–	Ground
14	MIPI_DSI_TX1_D3N	LVDS	Output	MIPI-DSI1 data signal Negative
15	MIPI_DSI_TX1_D3P	LVDS	Output	MIPI-DSI1 data signal Positive
16	GND	GND	–	Ground
17	PWM5	IO	Output	PWM Output for backlight adjust
18	NC	–	–	Not connected pin
19	3.3V	PWR	Output	3.3V @ 200mA Max
20	LCD1_RST_L_GPIO3_B6	IO	Output	GPIO output for lcd reset
21	SARADC_VIN2_LCD_ID	ANA	Input	Analog signal Input
22	LCD1_PWREN_H_GPIO4_D2	IO	Output	GPIO output for lcd power enable
23	I2C1_SCL_TP	IO	Output	I2C clock signal for touch panel
24	I2C1_SDA_TP	IO	I/O	I2C data signal for touch panel
25	TP_INT_L_GPIO0_B5	IO	Input	GPIO for touch panel interrupt
26	TP_RST_L_GPIO0_B6	IO	Output	GPIO for touch panel reset
27	GND	GND	–	Ground
28	5V	PWR	Output	5V @ 500mA Max in total
29	5V	PWR	Output	5V @ 500mA Max in total
30	5V	PWR	Output	5V @ 500mA Max in total

eDP

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	GND	GND	–	Ground
2	EDP_TX_D1N	LVDS	Output	EDP data signal Negative
3	EDP_TX_D1P	LVDS	Output	EDP data signal Positive
4	GND	GND	–	Ground
5	EDP_TX_D0N	LVDS	Output	EDP data signal Negative
6	EDP_TX_D0P	LVDS	Output	EDP data signal Positive
7	GND	GND	–	Ground
8	EDP_TX_AUXN_CON	LVDS	Output	EDP clock signal Negative
9	EDP_TX_AUXP_CON	LVDS	Output	EDP clock signal Positive
10	GND	GND	–	Ground
11	EDP_TX_D2N	LVDS	Output	EDP data signal Negative
12	EDP_TX_D2P	LVDS	Output	EDP data signal Positive
13	GND	GND	–	Ground
14	EDP_TX_D3N	LVDS	Output	EDP data signal Negative
15	EDP_TX_D3P	LVDS	Output	EDP data signal Positive
16	3.3V	PWR	Output	3.3V @ 500mA Max in total
17	3.3V	PWR	Output	3.3V @ 500mA Max in total
18	GND	GND	–	Ground
19	GND	GND	–	Ground
20	EDP_HPD_GPIO0_C2	IO	Input	eDP hot plug detect signal
21	GND	GND	–	Ground
22	GND	GND	–	Ground
23	GND	GND	–	Ground
24	GND	GND	–	Ground
25	EDP_BL_EN_GPIO3_C1	IO	Output	Output for enable backlight power
26	EDP_PWM12_GPIO4_C5	IO	Output	PWM Output for backlight adjust
27	GND	GND	–	Ground
28	12V	PWR	Output	12V power supply for backlight
29	12V	PWR	Output	12V power supply for backlight,
30	12V	PWR	Output	12V power supply for backlight

Camera

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	GND	GND	–	Ground
2	MIPI_CSI_RX_D0N	LVDS	Input	MIPI_CSI data signal Negative
3	MIPI_CSI_RX_D0P	LVDS	Input	MIPI_CSI data signal Positive
4	GND	GND	–	Ground
5	MIPI_CSI_RX_D1N	LVDS	Input	MIPI_CSI data signal Negative
6	MIPI_CSI_RX_D1P	LVDS	Input	MIPI_CSI data signal Positive
7	GND	GND	–	Ground
8	MIPI_CSI_RX_CLK0N	LVDS	Input	MIPI_CSI clock signal Negative
9	MIPI_CSI_RX_CLK0P	LVDS	Input	MIPI_CSI clock signal Positive
10	GND	GND	–	Ground
11	MIPI_CSI_RX_D2N	LVDS	Input	MIPI_CSI data signal Negative
12	MIPI_CSI_RX_D2P	LVDS	Input	MIPI_CSI data signal Positive
13	GND	GND	–	Ground
14	MIPI_CSI_RX_D3N	LVDS	Input	MIPI_CSI data signal Negative
15	MIPI_CSI_RX_D3P	LVDS	Input	MIPI_CSI data signal Positive
16	GND	GND	–	Ground
17	CIF_CLKOUT	IO	Output	CLOCK output for camera
18	GND	GND	–	Ground
19	NC	–	–	Not connected pin
20	CAMERA0_RST_L_GPIO4_B5	IO	Output	GPIO output for camera reset
21	CAMERA0_PDN_L_GPIO4_B4	IO	Output	GPIO output for camera disable
22	CAMERA0_PWREN_GPIO1_D4	IO	Output	GPIO output for camera enable
23	I2C4_SCL_M0	IO	Output	I2C clock signal
24	I2C4_SDA_M0	IO	Input	I2C data signal
25	PWM14_M0	IO	Output	PWM Output signal
26	GND	GND	–	Ground
27	GND	GND	–	Ground
28	5V	PWR	Output	5V @ 500mA Max in total
29	5V	PWR	Output	5V @ 500mA Max in total
30	5V	PWR	Output	5V @ 500mA Max in total
31	GND	GND	–	Ground
32	NC	–	–	Not connected pin
33	NC	–	–	Not connected pin
34	NC	–	–	Not connected pin
35	GND	GND	–	Ground
36	MIPI_MCLK1	IO	Output	CLOCK output for camera
37	GND	GND	–	Ground
38	MIPI_CSI_RX_CLK1N	LVDS	Input	MIPI_CSI clock signal Negative
39	MIPI_CSI_RX_CLK1P	LVDS	Input	MIPI_CSI clock signal Positive
40	GND	GND	–	Ground

M.2

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	NC	–	–	Not connected pin
2	3.8V	PWR	Output	3.8V @ 3A Max in total
3	GND	GND	–	Ground
4	3.8V	PWR	Output	3.8V @ 3A Max in total
5	GND	GND	–	Ground
6	M2_ONOFF_GPIO1_D2	IO	Output	GPIO output for on or off to module
7	HUB_HOST3_DP	LVDS	I/O	USB2.0 data signal Positive
8	NC	–	–	Not connected pin
9	HUB_HOST3_DM	LVDS	I/O	USB2.0 data signal Negative
10	M2_LED1	IO	Input	Connect negative for network status
11	GND	GND	–	Ground
20	NC	–	–	Not connected pin
21	NC	–	–	Not connected pin
22	NC	–	–	Not connected pin
23	M2_WAKE_GPIO0_B7	IO	Input	GPIO for module to wakeup CPU
24	NC	–	–	Not connected pin
25	NC	–	–	Not connected pin
26	NC	–	–	Not connected pin
27	GND	GND	–	Ground
28	NC	–	–	Not connected pin
29	PCIE30_TX1_N/HUB_USB3_SSTXN	LVDS	Output	PCIE3.0/USB3.0 data signal Negative
30	M2_UIM_RESET	IO	Input	Reset signal to SIM socket
31	PCIE30_TX1_P/HUB_USB3_SSTXP	LVDS	Output	PCIE3.0/USB3.0 data signal Positive
32	M2_UIM_CLK	IO	Input	Clock signal to SIM socket
33	GND	GND	–	Ground
34	M2_UIM_DATA	IO	Input	data signal to SIM socket
35	PCIE30_RX1N/HUB_USB3_SSRXN	LVDS	Input	PCIE3.0/USB3.0 data signal Negative
36	M2_UIM_PWR	IO	Input	power to SIM socket
37	PCIE30_RX1P/HUB_USB3_SSRXP	LVDS	Input	PCIE3.0/USB3.0 data signal Positive
38	NC	–	–	Not connected pin
39	GND	GND	–	Ground
40	NC	–	–	Not connected pin
41	PCIE30_TX0_N	LVDS	Output	PCIE3.0 data signal output Negative
42	NC	–	–	Not connected pin
43	PCIE30_TX0_P	LVDS	Output	PCIE3.0 data signal output Positive
44	NC	–	–	Not connected pin
45	GND	GND	–	Ground
46	NC	–	–	Not connected pin
47	PCIE30_RX0N	LVDS	Input	PCIE3.0 data signal input Negative
48	NC	–	–	Not connected pin
49	PCIE30_RX0P	LVDS	Input	PCIE3.0 data signal input Positive
50	PCIE30X2_PERSTN_M1	IO	Output	PCIe warm reset request
51	GND	GND	–	Ground
52	PCIE30X2_CLKREQN_M1	IO	Input	clock request from PCIe peripheral
53	CLK0N_CON	LVDS	Output	PCIE3.0 clock signal output Negative
54	PCIE30X2_WAKEN_M1	IO	Input	PCIe wake up
55	CLK0P_CON	LVDS	Output	PCIE3.0 clock signal output Positive
56	NC	–	–	Not connected pin
57	GND	GND	–	Ground
58	NC	–	–	Not connected pin
59	NC	–	–	Not connected pin
60	NC	–	–	Not connected pin
61	NC	–	–	Not connected pin
62	NC	–	–	Not connected pin
63	NC	–	–	Not connected pin
64	NC	–	–	Not connected pin
65	NC	–	–	Not connected pin
66	M2_SIM_DETECT	IO	Output	Card detect signal to SIM socket
67	M2_RESET_GPIO3_B5	IO	Output	GPIO output for reset to module
68	CLK32K_OUT0	IO	Output	Clock output 32.768K to module
69	NC	–	–	Not connected pin
70	3.8V	PWR	Output	3.8V @ 3A Max in total
71	GND	GND	–	Ground
72	3.8V	PWR	Output	3.8V @ 3A Max in total
73	GND	GND	–	Ground
74	3.8V	PWR	Output	3.8V @ 3A Max in total
75	NC	–	–	Not connected pin

Mini-PCIe

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	WAKEUP_MINIPCIE_GPIO0_C1	IO	Input	GPIO for module to wakeup CPU
2	3.8V	PWR	Output	3.8V @ 3A Max in total
3	NC	–	–	Not connected pin
4	GND	GND	–	Ground
5	NC	–	–	Not connected pin
6	NC	–	–	Not connected pin
7	NC	–	–	Not connected pin
8	UIM_PWR	PWR	Input	SIM power supply
9	GND	GND	–	Ground
10	UIM_DATA	IO	Input	SIM data signal
11	NC	–	–	Not connected pin
12	UIM_CLK	IO	Input	SIM clock signal
13	NC	–	–	Not connected pin
14	UIM_RESET	IO	Input	SIM reset signal
15	GND	GND	–	Ground
16	NC	–	–	Not connected pin
17	NC	–	–	Not connected pin
18	GND	GND	–	Ground
19	NC	–	–	Not connected pin
20	NC	–	–	Not connected pin
21	GND	GND	–	Ground
22	MiniPCIE_reset_GPIO3_D4	IO	Output	GPIO output for reset to module
23	NC	–	–	Not connected pin
24	3.8V	PWR	Output	3.8V @ 3A Max in total
25	NC	–	–	Not connected pin
26	GND	GND	–	Ground
27	GND	GND	–	Ground
28	NC	–	–	Not connected pin
29	GND	GND	–	Ground
30	NC	–	–	Not connected pin
31	NC	–	–	Not connected pin
32	NC	–	–	Not connected pin
33	NC	–	–	Not connected pin
34	GND	GND	–	Ground
35	GND	GND	–	Ground
36	USB2_HOST2_DM	LVDS	I/O	USB2.0 data signal Negative
37	NC	–	–	Not connected pin
38	USB2_HOST2_DP	LVDS	I/O	USB2.0 data signal Positive
39	3.8V	PWR	Output	3.8V @ 3A Max in total
40	GND	GND	–	Ground
41	3.8V	PWR	Output	3.8V @ 3A Max in total
42	LED	IO	Input	System status LED
43	NC	–	–	Not connected pin
44	SIM_DETECT	IO	Output	SIM detect
45	NC	–	–	Not connected pin
46	NC	–	–	Not connected pin
47	NC	–	–	Not connected pin
48	NC	–	–	Not connected pin
49	NC	–	–	Not connected pin
50	GND	GND	–	Ground
51	NC	–	–	Not connected pin
52	3.8V	PWR	Output	3.8V @ 3A Max in total

U.2

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	GND	GND	–	Ground
2	SATA0_SSRXP	LVDS	Input	SATA data signal input Positive
3	SATA0_SSRXN	LVDS	Input	SATA data signal input Negative
4	GND	GND	–	Ground
5	SATA0_SSTXN	LVDS	Output	SATA data signal output Negative
6	SATA0_SSTXP	LVDS	Output	SATA data signal output Positive
7	GND	GND	–	Ground
8	GMAC0_TXEN	IO	Output	RGMII signal
9	GMAC0_RXD2	IO	Input	RGMII signal
10	NC	–	–	Not connected pin
11	GMAC0_RXD3	IO	Input	RGMII signal
12	GMAC0_RXD0	IO	Input	RGMII signal
13	GMAC0_RXD1	IO	Input	RGMII signal
14	NC	–	–	Not connected pin
15	I2C3_SCL_M0	IO	Output	I2C clock signal
16	I2C3_SDA_M0	IO	I/O	I2C data signal
17	GND	GND	–	Ground
18	GND	GND	–	Ground
19	GND	GND	–	Ground
20	5V	PWR	Output	5V @ 3A Max
21	5V	PWR	Output	5V @ 3A Max
22	5V	PWR	Output	5V @ 3A Max
23	GND	GND	GND	Ground
24	NC	–	–	Not connected pin
25	GND	GND	–	Ground
26	NC	–	–	Not connected pin
27	NC	–	–	Not connected pin
28	NC	–	–	Not connected pin
29	SATA0_LED	IO	Output	SATA0 status for LED
30	SATA2_LED	IO	Output	SATA2 status for LED
31	GMAC0_MCLKINOUT	IO	I/O	CLOCK output 125MHz for GMAC0
32	GND	GND	–	Ground
33	ETH0_REFCLKO_25M	IO	Output	CLOCK output 25MHz for GMAC0
34	GMAC0_MDIO	IO	I/O	GMAC management interface data
35	GND	GND	–	Ground
36	GMAC0_MDC	IO	Output	GMAC management interface clock
37	GMAC0_RXDV_CRS	IO	Input	RGMII signal
38	GND	GND	–	Ground
39	NC	–	–	Not connected pin
40	NC	–	–	Not connected pin
41	GND	GND	–	Ground
42	NC	–	–	Not connected pin
43	NC	–	–	Not connected pin
44	GND	GND	–	Ground
45	USB2_USB3_DM	LVDS	I/O	USB2.0 data signal Negative
46	USB2_USB3_DP	LVDS	I/O	USB2.0 data signal Positive
47	GND	GND	–	Ground
48	GMAC0_RSTN_GPIO2_D3	IO	Output	RGMII signal
49	GMAC0_INT/PMEB_GPIO2_D2	IO	Input	RGMII signal
50	GND	GND	–	Ground
51	GMAC0_RXCLK	IO	Output	RGMII signal
52	GND	GND	–	Ground
53	GMAC0_TXD3	IO	Output	RGMII signal
54	GMAC0_TXD2	IO	Output	RGMII signal
55	GND	GND	–	Ground
56	GMAC0_TXD1	IO	Output	RGMII signal
57	GMAC0_TXD0	IO	Output	RGMII signal
58	GND	GND	–	Ground
59	GMAC0_TXCLK	IO	Output	RGMII signal
60	GND	GND	–	Ground
61	SATA2_TXN	LVDS	Output	SATA data signal output Negative
62	SATA2_TXP	LVDS	Output	SATA data signal output Positive
63	GND	GND	–	Ground
64	SATA2_RXN	LVDS	Input	SATA data signal Input Negative
65	SATA2_RXP	LVDS	Input	SATA data signal Input Positive
66	GND	GND	–	Ground
67	PCIE20_REFCLKN	LVDS	Output	PCIE2.0 reference clock Negative
68	PCIE20_REFCLKP	LVDS	Output	PCIE2.0 reference clock Positive

SATA Power

PIN #	PIN NAME	PIN TYPE	INPUT/ OUTPUT	SIGNAL DESCRIPTION
1	ADC_VIN3	ANA	Input	Measure external voltage, 1.8V Max
2	I2C0_SCL	IO	Output	I2C clock signal
3	I2C0_SDA	IO	I/O	I2C data signal
4	GND	GND	–	Ground
5	GND	GND	–	Ground
6	GND	GND	–	Ground
7	NC	–	–	Not connected pin
8	NC	–	–	Not connected pin
9	NC	–	–	Not connected pin
10	GND	GND	–	Ground
11	GND	GND	–	Ground
12	GND	GND	–	Ground
13	VIN_12V	PWR	Input	12V @ 3A
14	VIN_12V	PWR	Input	12V @ 3A
15	VIN_12V	PWR	Input	12V @ 3A

Schematic

The detailed schematic diagram of Edge 2 hardware can be seen here. https://github.com/mixtile/docs/blob/1ec10411d883b5e1258b10feac598c36bcbe93e8/content/Where%20to%20Go%20Next/Hardware%20Tutorial/Schematic.of.the.Edge.2.pdf

Was this article helpful?

Yes No

Data Sheet

Introduction

Main Features

Connectors and Pinouts

Schematic

Popular Articles

Contents